Skip To The Main Content
UPCOMING EVENT
OLearys Equipment

O'Leary's
Contractors Equipment

  • Rentals
  • Sales
  • Service
  • Parts
(773) 252-6600 Location Contact Us FAQs
☰

Details

E-Z Drill 210B-2 SRA Slab Rider

Available For Rent
Available For Purchase


Achieve greater efficiency when drilling on slab with the 210B-2 SRA. It’s equipped with two-gang drill system that operates simultaneously and are adjustable to drill every 12 to 36 inches on center. It also can be customized to meet wider spacing requirements. The 210B-2 SRA requires 200 cfm and fits within a 4-foot patch. It also can be configured for on-grade drilling. With its patented tri-steering system, the drill repositions quickly and moves easily.
Request a Quote

Product files and documents

 
210B-2 SRA Specs PDF file, 1.31 MB
210B-2 SRA Manual PDF file, 341.26 KB


Horizontal Position

Lower Length (A) 46 in (116.8 cm)
Lower Length (A) + (C) 100 in (254.0 cm)
Cart Length (C) 54 in (137.2 cm)
Wheel Base (D) 48 in (121.9 cm)
Width 54 in (137.2 cm)
Height (E) 39 in (99.1 cm)
Weight 1,150 lbs (522.1 kg)
Drill Distance From Corner 6 in (15.2 cm)
Drill Distance From Ground 3 in (7.6 cm)
Drill Depth (std.) 18 in (45.7 cm)
Drill Bit Diameter 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Distance From Wheel to Center of Bit (F) N/A
Drill Motor (pneumatic) CP 32A
Drill Motor Weight 54 lbs (24.5 kg)
Chuck Size (std.) 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum) 200 cfm (5.6 m3/min)
Operating Pressure 90 psi (6.2 bar)
Impact (ft. lbs./blow) 36 fpb (49 J)
Hammer Speed 2200 bpm
Speed 288 rpm

 

Vertical Position

Lower Length (A) N/A
Lower Length (A) + (C) 73 in (185.4 cm)
Cart Length (C) 54 in (137.2 cm)
Wheel Base (D) 48 in (121.9 cm)
Width 54 in (137.2 cm)
Height (E) Varies
Weight 1,150 lbs (522.1 kg)
Drill Distance From Corner N/A
Drill Distance From Ground Up to 12 in (30.5 cm)
Drill Depth (std.) 18 in (45.7 cm)
Drill Bit Diameter 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Distance From Wheel to Center of Bit (F) 21 1/2 in (54.6 cm)
Drill Motor (pneumatic) CP 32A
Drill Motor Weight 54 lbs (24.5 kg)
Chuck Size (std.) 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum) 200 cfm (5.6 m3/min)
Operating Pressure 90 psi (6.2 bar)
Impact (ft. lbs./blow) 36 fpb (49 J)
Hammer Speed 2200 bpm
Speed 288 rpm